Licensed & Insured · Permit-Guided · Long Beach, CA
Automatic Gate Installation in Long Beach, CA
Upgrade your driveway gate with a reliable automatic operator. Sebastian Sliding Doors installs swing and sliding gate motors with keypad entry, remote controls, and intercom systems throughout Long Beach area. Licensed, insured, and permit-guided.
✓ All major operator brands✓ Keypad, remote & smart access✓ CA safety code compliant✓ Flat-rate pricing
Sebastian Sliding Doors is located at Long Beach, CA 90814 and serves all of Long Beach, CA. Call (562) 555-0000 for a free automatic gate estimate.
Types of Automatic Gate Operators We Install
The right operator depends on your gate style, driveway layout, and the level of convenience you want. Modern automatic gate operators work similarly to garage door openers but are built for the heavier loads and outdoor exposure of driveway gates. Sebastian Sliding Doors installs all of the following:
Swing gate operators (single arm) — mount to one gate panel and one post; the most common choice for single driveway swing gates
Swing gate operators (dual arm) — two operators synchronized for double swing driveway gates; ideal for wider openings up to 16+ feet
Sliding gate operators (chain-drive) — reliable workhorse for residential and light commercial sliding gates; uses a chain rail attached to the gate
Sliding gate operators (rack-drive) — uses a rack gear welded or bolted to the gate for quieter, more precise operation; preferred for heavier gates
Vertical pivot lift operators — for gates on steep slopes where a standard swing would collide with the driveway grade
Solar-powered operators — ideal for gates away from power sources or for homeowners wanting to reduce electrical costs; includes a battery backup panel
Access Control Options
Your automatic gate is only as convenient as its access control system. Sebastian Sliding Doors installs and programs every type of entry method for Long Beach area homeowners:
Keypad Entry Enter a PIN code to trigger the gate. Ideal for homes, rentals, or properties with multiple regular visitors. Codes can be changed easily without replacing hardware.
Remote Controls 1-to-4 channel transmitters for one or multiple gates. Program additional remotes for family members or service vehicles. Visor clips available for in-vehicle convenience.
Vehicle Loop Detectors Buried inductive loops detect vehicle mass and automatically open or hold the gate open. A must-have safety feature for exit-side automation, preventing the gate from closing on a vehicle.
Telephone Entry / Intercom Visitors call a phone number or extension from a keypad at the gate. You answer and press a key to open the gate — no need to go outside. Video intercom options available for visual confirmation.
Smart / App-Controlled Systems LiftMaster myQ-compatible operators let you open, close, and monitor your gate from your smartphone anywhere in the world. Includes activity log, timed auto-close, and smart home integration.
Safety Features Required by California Code
California law and ASTM F2200 require specific safety features on all automated vehicular gates. Gate posts and hardware are typically constructed from galvanized steel or powder-coated aluminum for maximum corrosion resistance in OC's coastal environment. Sebastian Sliding Doors installs every operator in full compliance:
Entrapment protection sensors — photoelectric or contact sensors that detect obstructions in the gate path
Safety edges — pressure-sensitive edges that trigger a stop and reverse if the gate contacts an object or person
Auto-reverse on obstruction — the gate automatically reverses direction if it encounters resistance mid-cycle
Monthly cycling limits — operators are configured within rated duty cycles to prevent overheating and mechanical failure
ASTM F2200 compliance — all gate operator installations conform to ASTM F2200 Standard Specification for Automated Vehicular Gate Construction
Our Automatic Gate Installation Process
Step 1 — Site Survey We visit your property, assess the existing gate (or plan a new one), measure the opening, evaluate power supply, and recommend the right operator and access control for your application.
Step 2 — Permit (If Required) We advise on permit requirements for your city and assist with the application. Most electrical/operator permit submissions are straightforward and we handle the paperwork.
Step 3 — Gate Operator Installation We mount and wire the operator, install the control board, run conduit and power from the nearest source, and set all limit switches for correct open/close positions.
Step 4 — Access Control Setup We install and program your keypad, remotes, intercom, or app-based system. We configure user codes, test all entry methods, and walk you through operation.
Step 5 — Safety Testing & Demo We test all entrapment protection devices, verify auto-reverse, confirm loop detector sensitivity, and demonstrate full operation before we leave — including the manual release procedure for power outages.
Automatic Gate Installation Cost in Long Beach area
Pricing depends on the type of operator, gate size, and access control complexity. Here's a general guide:
System / Component
Typical Range
Single swing gate operator
$900 – $1,800
Dual swing gate operator
$1,600 – $2,800
Sliding gate operator (residential)
$1,200 – $2,200
Keypad entry system
$300 – $600
Intercom / video entry system
$500 – $1,200
Complete auto gate package (gate + operator + keypad)
$2,500 – $5,500
All pricing is flat-rate and confirmed before work begins. Call (562) 555-0000 for your free on-site estimate.
Sebastian Sliding Doors is located at Long Beach, CA 90814 and serves all of Long Beach area. Call (562) 555-0000 and Sebastian Sliding Doors will provide a free automatic gate estimate.
Need a manual gate first? See our Gate Installation page for gate-only pricing and material options. Most automatic gate projects pair with a complete fence installation — we handle both together. If an existing fence or gate needs work first, our fence repair team can assess and fix it before the operator goes in. For a wrought iron fence and gate combination, we handle the full project together.
Frequently Asked Questions
Usually yes. Most cities in Long Beach area require a permit for new electrical work and automatic gate operator installation. Sebastian Sliding Doors will advise you on the specific requirements for your city and assist with the permit application process so you don't have to navigate it alone.
Sebastian Sliding Doors installs LiftMaster, FAAC, All-O-Matic, Apollo, and US Automatic gate operators — all leading brands with proven reliability and wide parts availability throughout Long Beach area. We'll recommend the best brand and model for your specific gate weight, usage frequency, and access control needs.
Usually yes, provided the gate is structurally sound. The gate frame, hinges, and posts need to be in good condition to handle the cycling load of an electric operator. Sebastian Sliding Doors will assess your existing gate at no charge during the free site survey.
Every automatic gate operator we install includes a manual release mechanism — typically a quick-release handle or key-operated disconnect — so you can always open and close the gate by hand during a power outage. Battery backup systems are also available and strongly recommended for driveway gate operators.
Most automatic gate installations are completed in 1–2 days. A straightforward single-arm swing operator with keypad can often be done in one day. Projects with video intercoms, vehicle loop detectors, or multiple access control zones may require a second day.
Yes. Sebastian Sliding Doors repairs and services all brands and models of automatic gate operators throughout Long Beach area — including LiftMaster, FAAC, DoorKing, All-O-Matic, Apollo, Linear, and more. Whether you need a board replacement, sensor repair, or access control reprogramming, we can help. Call (562) 555-0000.
Ready to Automate Your Gate?
Professional automatic gate installation across Long Beach, CA. Free estimate — licensed, insured, permit-guided.